创新科技
速瑞达造
Innovated By S-RIDE
4. Cable change
：
Figure (4)
The shifter does not need to be slided
from the handlebar and opened.
Line-up the shifter in gear position
“1“ (front shifter) or the highest gear
number (rear shifter).
Detach the cable from the derailleur.
Cut the cable off about 20cm from the
shifter barrel adjuster. Discard the old
cable and cable housing.
Push cable out of the cable entry with
rotating movement.
Figure (5)
Feed the new cable through the cable
entry and out of the barrel adjuster.
Feed the cable through the new cable
housing and cable stops.
Attach the cable to the derailleur and
adjust indexing per derailleur instructions.
3
