![background image](http://html1.mh-extra.com/html/s-s/gls-350-150-genius/gls-350-150-genius_operating-instructions-manual_3077800023.webp)
Installation suggestions
Einbauhinweise-DLS-GLS-EN-V1.2.doc
Page 1 of 4
for tunnel metal detectors type DLS / GLS
To ensure optimal metal detection and
failure-free operation, please note:
1. Design
Separable tunnel detection coil DLS
Closed tunnel detection coil GLS
S+S differentiates between two types of
tunnel metal detectors:
•
GLS
•
DLS
The equipment is used for inspection of
bulk material with large material height and
when high sensitivity is necessary. They
are installed on conveyor belts or chutes.
The metal detectors consist of a control
unit and a tunnel coil.
Normally the control unit is attached to the
tunnel coil. Optionally, the control unit can
be detached and installed at the conveyor.
For more information about these metal
detectors please refer to our brochures,
data sheets and manuals. Should you
have any further questions, don’t hesitate
to ask any of our S+S sales representa-
tives.
Subject to change withou
09-09-17
t
notice !
S+S Separation and Sorting Technology GmbH
•
Regener Str. 130
•
D-94513 Schönberg
•
Germany
Tel. +49(0)8554/308-0
•
Fax: +49(0)8554/2606
•
e-mail: info@se-so-tec.com
•
Internet: www.se-so-tec.com