S2Konnect N-2020SX
12
Figure 2. Connection of fiber-optics cables/plugs
LINK
ACT
LINK
ACT
Transmit Port (TX)
Receive Port (RX)
5.
Turn on the computer and the Switch.
6.
Check the link LED(s) to find out if the cable is connected correctly.
If the appropriate LED is on, the connection is established and active. Otherwise you
have to check the network adapter more closely. (For details, refer to chapter ? “Testing
the network Adapter” and chapter 7 “Troubleshooting“).
As soon as the connection to the network is etablished, the installation of the network adapter is
complete. Keep this manual with your computer manual for future reference.
The network adapter will not be fully operational until suitable drivers are loaded. See how to install
drivers for the operating system of your choice. Refer to drivers “Read me“ or manuals for driver
installation.
You will find a list of available drivers at:
http://www.marvell.com
> SUPPORT >
> CHOOSE A PLATFORM >
> SEARCH >
> ACCEPT AND SUBMIT >
> DOWNLOAD THE ARCHIVE ON A ZIP FILE
The chipset you have to select is: “88E8022”
i