User’s Manual
19
Specification
Input
2EA(Model:HVS-6204 / HVS-6208)
Output
4EA (Model:HVS-6204), 8EA(Model:HVS-6208)
User Interface
Remote Control
IR
RS232
Remote PC/ Device
LED
POWER : On / Off
SYNC : Indication of valid input signal
HDCP : HDCP being used (1.4 / 2.2)
EDID : Emulation Being used
HDR : HDMI Info frame of HDMI outputs being used
INPUT : Input selection display
Buttons
Touch sensors
POWER : Power ON / OFF
Input/function (1~2) selectable.
Touch 1~4 after pressing F(Function)
Power
+12V 3A
DC Jack
Firmware Upgrade
Yes
USB memory stick(FAT32)
HDMI Version
2.0a
Up to 4096 x 2160p @ 60Hz (YCbCr / RGB 4:4:4)
Up to 18Gbps (6Gbps per channel)
HDCP Version
2.2 / 1.4
HDCP 2.2 / 1.4 Support
EDID Emulation
EDID Emulation Mode Support
(Dynamic mode 4type / Static mode 4type)
Direct current
To indicate on the rating plate that the equipment is suitable for direct current only.
To identify relevant terminals.
Troubleshooting for no power
- Check if LED light on the front is turned on.
- Make sure the power cord connectors on both ends are firmly attached.
Please refer to the webpage,
www.dzonei.com
for more detailed information
for the troubleshooting
