OPERA
T
ION
stage accompany
R
BB35 USER MANUAL
4-8
4
4
4
4
.
.
.
.
3.
4
4.
4.
9
1
2
Channel Link
System Menu
Load Preset
Save Preset
EXIT
EXIT
MENU
MENU
SELECT
SELECT
Out 12 Link:
Out 1 Link
On
Off
By linking 2 channels, the settings are guaranteed to be identical for both channels, except
Push the Menu button to enter the system menu. Push the Menu button again to toggle
Turn the rotary encoder to select the preset you wish to load. Push the rotary encoder to
Turn the rotary encoder to select the location of the preset. If that location is not empty, the
select it, then turn it again to select "YES" and confirm again by pushing the rotary encoder
preset in that location will be overwritten.
This action can not be undone!!
knob. The preset is loaded and all settings are applied immediately. All settings that were
The system will ask you to give a name to the preset name. Select a character in the cursor
in the unit prior to loading the preset will be erased.
This action can not be undone!!
position by turning the rotary encoder; pushing the rotary encoder confirms the character
The presets contain all filter, dynamics, gain settings etc; in other words, everything that
selected and moves the cursor to the next character to edit. Pushing the exit/ESC button
makes out a loudspeaker configuration. Presets do NOT contain the name of the unit,
erases the last confirmed character. Once the name is set up, push the menu button again.
network configuration, automatic standby delay, user access rights and passwords.
If you want to continue storing the preset, select Yes by turning the rotary encoder and
confirm by pushing it. To cancel, push the exit button. Now your preset is saved in the
selected location. The presets contain all filter, dynamics, gain settings etc; in other words,
everything that makes out a loudspeaker configuration. Presets do NOT contain the name of
the unit, network configuration, automatic standby delay, user access rights and passwords.
through the menu items. The available menu items are:
for mixer and mute. Turn the encoder to set the Channel link on or off.
You are free to save your presets to the next available location after the factory presets.
Factory presets are not rewritable.