32 026 006 11
Saab 9-5
32
5D -
Fit the control module and secure the wir-
ing harness:
·
Attach the ground cable to the grounding
point (A) in the luggage compartment below
the left-hand tail lamp.
·
Route the wiring harness along the left-hand
wheel housing. The wiring harness must be
routed to the right at the seatbelt and then fol-
low the wheel housing.
·
Connect the wiring harness to the control
module (B) and mount the control module on
the floor. Tighten the plastic nuts.
·
Secure the wiring harness the whole way
using cable ties (C, CA and CB).
CA - Cable tie for mounting weld screw.
CB - Cable tie with clip for mounting in holes.
WARNING
Check that the wiring harness is not trapped.
Incorrect fitting could damage the wiring harness
and cause a short-circuit/fire.
Important
Secure the wiring harness so that there is no risk
of chafing and rattling.
E930A523
A
C
B
CA
CB
CA
C C
C
C
C