R5
SUPREME - Navigation System
OPERATION
7000 118-301, A
Page 91
4. Some ports have season or fortnightly variations in mean level and harmonic
constants. If so, such variations can be input by selecting ―Use Table…‖ in the
corresponding drop list for the parameter.
Figure 73
– Add Port – Input Seasonal Variations
A new view will be shown where the variation values from the ―Admiralty Tide
Tables‖ can be input. Press ―Apply‖ to use the variation values and return to the
Add Port
view.
Figure 74
– ML Seasonal Variations
5. In the
Add Port
view, press the button
―Save‖ when all data for the port has
been entered in order to store the new port and return to the
Port List
view.
The following data can be input for each port:
ID
Port No. from ATT part III.
Name
Place name from ATT part III.
Zone
UTC offset time zone (UTC time
– Local Time) in hours and
minutes from ATT part III. This information is important since ATT
data is referenced to a local time in port with this offset from UTC.
Enter this data as defined in ATT regardless of adjustments for
other local time offsets (e.g daylight savings time). See further
notes on treatment of time offset in sections below.
Position
Latitude and longitude of port. This is optional information that is
not required for calculation of tides. If entered, the current
distance to the actual port will be shown in the list of tidal stations.
Position is not listed in ATT part III.
ML Z0
This is mean level in meters from ATT part III. For most stations
this is a fixed value. Tables of seasonal corrections and fortnightly
Summary of Contents for R5 SUPREME AIS
Page 1: ...OPERATION INSTALLATION MANUAL Saab TransponderTech R5 SUPREME Navigation System ...
Page 2: ...This page is intentionally empty ...
Page 60: ...R5 SUPREME Navigation System OPERATION 7000 118 301 A3 Page 60 5 4 System Menus Tree View ...
Page 103: ...R5 SUPREME Navigation System OPERATION 7000 118 301 A Page 103 Figure 92 Update Software ...
