R5 SUPREME NAV System
Operator Short Instruction
7000 118-369 A1
BRIGHTNESS AND DIMMING
Adjust LCD and LED dimming levels and dimming mode in:
Main Menu
Maintenance
Configuration
Display
Visual
Parameters
In manual dimming mode (default) the overall dimming level control can
be quickly reached by pressing and holding the POWER button for 2
seconds.
ACKNOWLEDGE ACTIVE ALARMS
Press the
Ack
button to acknowledge alarm indications on the display.
VIEW ACTIVE ALARMS
Press the alarm icon in the status bar or select:
Main Menu
Status
Alarm List
MONITOR SYSTEM INTEGRITY
System integrity can be quickly assessed from the Status Bar icons, or
by entering the different views under
Main Menu
Status
STATUS BAR ICONS
GENERAL ICONS
Unread DGPS message.
Active alarms.
Navigating without differential corrections.
Using differential correction applied through User Port 1.
Using differential correction applied through User Port 1,
Integrity Alert.
Using correction from internal radio beacon receiver
(DGPS version).
Using correction from internal radio beacon receiver
(DGPS version), Integrity Alert.
Using differential corrections from SBAS.
Using differential corrections from SBAS, Integrity Alert.
No valid position information.
No communication with the R4 Navigation Sensor.
HDOP status indication (active if HDOP is above 4).
Navigation Sensor configured to use differential corrections
but no differential corrections are used.
