15°
Note:
Use this hole with
motor 30x30, M4mm.
Screw M4x6mm
(HC351-S)
5mm
28mm
10mm
Flat Head Cap
Screw M3x5mm
(HC132-S)
21T Pulley
(H0215-21-S)
(See page 16 for additional
pulleys available)
Socket Head Cap
Screw M2.5x8mm
(HC020-S)
Washer 4.3x 11x1mm
(HC184-S)
Metric Hex Nylon Nut M4H5
(HC212-S)
Spring de 5 / df 0.3 / LL6
(HC316-S)
Note:
To maximize space for the batteries,
it is advisable to shorten the motor shaft.
Follow the dimensions given in this drawing.
For the cut, you can use an electric tool like a
“Dremel” with a cut-off disc.
Additionally, ensure the motor shaft has an
appropriate 'flat' for one of the set screws.
Motor Support
(H0291-S)
Set Screw
M4x15mm
(HC154-S)
Finishing
Washer M2.5
(H0255-S)
Bushing 5x 6x18mm
(H0266-S)
(Needed with 5 mm motor shaft)
Socket Head Cap
Screw M2.5x8mm
(HC020-S)
Spring
de 3 / df 0.53 / LL35
(HC311-S)
Note:
Recommended
motor wiring
orientation
Set Screw
M4x4mm
(HC152-S)
Bags 3.1, 3.2, Foam 3
Page 10
Chapter 5, Tranmission Assembly
