Automatic Backflush Filter F450
State:
05.02.2016
– 1.3
Georg Schünemann GmbH, Bremen
1-2
1.2
Basic safety instructions
Danger through pressure
Before maintenance and repair work you have to make sure at any rate that the
vessel is unpressurized prior to starting any maintenance work at the automatic
backflush filter F450.
Danger through high voltage
Prior to any maintenance and repair work, the filter has to be de-energized and
safeguarded against unintentional reenergizing. The zero potential is to be de-
termined. Neighbouring energized parts are to be covered or provided with
gates.
Possible endangerment
Measures for avoidance
Function failure by wrong handling and/or
assembly
Explanation:
If incorrect or not expressly described parts at
the filter are installed and/or changed, the func-
tion of the filter can be set out of strength or
disturbed substantially.
Possibility to injuries of the serving and mainte-
nance staff during the operation and mainte-
nance.
Only parts may be inserted, attached or
changed, which are listed in the manual and
the pertinent documents.
In case of doubt, information is to be ob-
tained by the manufacturer.
Use only prescribed and perfect tools for the
repair.
Function failure by wrong handling and/or
assembly
Explanation:
If the diameter of the inlet and/or expiration line
does not correspond to the defaults of the
manufacturer of the filter, the function of the
filter can be set out of strength or disturbed
substantially.
Guarantee that the drain lines have the di-
ameter demanded by the manufacturer.
