the plug into the wall outlet. This is to allow the protection device
in the compressor to reset.
If the compressor fails to start correctly remove the plug and wait
for 5 minutes before you try again then the compressor should
restart normally.
The storage temperature may be affected by:
– The room temperature
– How often the door is opened
– How much food is stored
– Position of the appliance
When you set the correct temperature, all these factors men-
tioned above shall be taken into account.
TEMPERATURE INDICATE
In order to help you get the correct adjustment of your device, it
is equipped with a temperature gauge placed in the coldest area.
For the proper storage of food in your refrigerator and in particu-
lar in the coldest area, make sure that “OK” appears in the tem-
perature indicator.
The symbol on the left side indicates the location
of the coldest area of your refrigerator. It defines
the height of this area.
If “OK” is not displayed, the average temperature in
this area will be very high. You ought to adjust the
thermostat to a colder setting.
4). In Summer (especially when the temperature is above 35°C),
set the temperature to be Mode 2 and adjust the air volume
control lever to or near the MAX position.
5). In winter (when the temperature is 16°C or below), set the
temperature to be Mode 2 and adjust the air volume control
lever to or near the MIN position.
FAST COOL
6). When you need to quickly cool down hot food, select the
“FAST COOL” button for setup.
Note:
The refrigerator will automatically restore to its pre-
vious setting after 2-3 hours, with the “Fast Cool” function
disabled.
7). Air volume control switch
When the air control lever is adjusted to the MIN position,
the air volume inside the fridge is lowest.
When the air control lever is adjusted to the MAX position,
the air volume inside the fridge is highest.
Please Note:
If the appliance is switched off you must wait at
least 5 minutes before restarting the appliance or re-inserting
41
40
GB
GB
