2� Remove three screws with suitable tools� Remove the upper hinge then take off carefully the
fridge compartment door�
3� Remove middle hinge, screws, screw caps and plastic inserting nails� Install them on the other
side� Take off the lower door and put it away�
Remove three screws
4� The disassembly and installation of bottom parts :
A� Disassemble lower hinge and screws� Then install them on the other side and consolidate the
lower hinge�
Note: the refrigerator-freezer incline angle less 45°�
B� Swap over the position of the adjustable foot to the other side of the cabinet�
8� Move the hinge to another side of the box after removing the screws on the hinge;
Use screws to fasten�
9� Install the hinge cover after fastening the hinge�
C� Swap over the position of the lower door block to the other side� Install the screws and
consolidate them�
5� Install the lower door and take care of its alignment with the appliance body�
6� Tighten the screws of the middle hinge on the reversible side�
7� Install the top door and remove the existing top door block� Install a new top door block
(not the same one) on the reversible side� Screw it down�
11
10
GB
GB
