15
14
GB
GB
B. Swap over the position of the adjustable foot to the other
side of the cabinet.
C. Swap over the position of the lower door block to the other
side. Install the screws and consolidate them.
5. Install the lower door and take care of its alignment with the
appliance body.
6. Tighten the screws of the middle hinge on the reversible
side.
7. Install the top door and remove the existing top door block.
Install a new top door block (not the same one) on the
reversible side.
8. Move the hinge to another side of the box after removing the
screws on the hinge; Use screws to fasten.
9. Install the hinge cover after fastening the hinge.
ATTACHEMENT
1. Components that could be transferred from one side to the
other directly after disassembling are listed below:
–
top door top endcap coverslip (2pcs)
–
top cover buckle (1 pc)
–
hinge shaft sleeve (1 or 2pcs)
–
screws of top hinge (3 pcs)
–
middle hinge assembly (1 pc)
–
screws of middle hinge (2 pcs)
–
insert nail (2 pcs)
–
screw cap (2 pcs)
–
door stopper (1 pc)
–
bottom hinge assembly (1 pc)
–
screws of lower hinge (3pcs)
Screw it down.
