ENGLISH
ENGLISH
GB-21
GB-20
We recommend you have someone to assist you.
To take the door off it is necessary to tilt the
Appliance backward.
You should rest the Appliance on something
solid e.g. a chair just below the top panel.
Do not lay the Appliance completely flat as this
may damage the coolant system.
MAINTENANCE
FRIDGE DEFROSTING
The fridge defrosting process is carried out
automatically every time the compressor stops.
The defrost water is automatically routed to the
drain port and into a tray placed on the top of
the compressor to the rear of the appliance from
which it evaporates.
Make sure the drain port on the fridge at the
rear of the appliance is kept clear.
FREEZER DEFROSTING
Frost will accumulate inside the freezer
depending upon the length of time during which
the door is left open or the amount of moisture
introduced.
It is essential to ensure that no frost or ice is
allowed to form at places where it will affect the
close fitting of the door seal.
This might allow air to penetrate the cabinet,
thus encouraging continuous running of the
compressor.
Thin frost formation is quite soft and can be
removed with a brush or plastic scraper. Do not
use metal or sharp scrapers, mechanical devices
or other means to accelerate the defrosting
process. Remove all dislodged frost from the
cabinet floor.
For the removal of thin frost it is not necessary
to switch off the appliance.
For the removal of heavy ice deposits disconnect
the appliance from the mains supply and empty
the contents into cardboard boxes and wrap in
thick blankets or layers of paper to keep them
cold. Defrosting will be most effective if carried
out when the freezer is empty, and it should be
carried out as quickly as possible.
Summary of Contents for CB309R
