Lamp Replacement
LED light is used in this appliance, which with low energy
consumption & long life�
If anything abnormal, please contact after-sale service for help�
Reversing the Door Swing
1� Disassemble the refrigerator/freezer door
1)� a� Use a tool to remove the screw off the hinge cover, and then
remove the latter�
Insert the communication line to the hole on the cabinet top�
b� Use a tool to remove the 4 screws off the upper hinge cover
and then remove the latter�
Pry up the door bush and small end cap cover on the door�
c� Insert the door bush and door communication line into the
hole on the door and then put on the small end cap cover�
d� Use a tool to remove the 2 screws as shows in the below figure
to remove the hole cover on the cabinet top and get the cabinet
communication line out of the hole�
Pry up the small end cap cover on the door and get out the door
bush and door communication line�
e� Insert the door bush into the round hole on the door and then
put on the small end cap cover�
52
51
GB
GB