Higher settings on the knob (MAX) mean lower temperatures (colder) in all compartments of
the appliance.
Changes of the ambient temperature affect temperature in the interior of the appliance so
choose a correct setting of the temperature control knob, depending on your ambient
conditions.
In the STOP (OFF) position the appliance does not operate (the cooling system is switched
off), but power supply is not interrupted.
Set the thermostat knob to a middle position to achieve -18
o
C in the freezer compartment.
Please Note
: If the appliance is switched off you must wait at least 5 minutes before
restarting the appliance or re-inserting the plug into the wall outlet. This is to allow the
protection device in the compressor to reset.
If the compressor fails to start correctly remove the plug and wait for 5 minutes before you
try again then the compressor should restart normally.
The storage temperature may be affected by:
The room temperature
How often the door is opened
How much food is stored
Position of the appliance
When you set the correct temperature, all these factors mentioned above shall be taken into
account.
TEMPERATURE INDICATE
In order to help you get the correct adjustment of your device, it is equipped with a
temperature gauge placed in the coldest area.
For the proper storage of food in your refrigerator and in particular in the coldest area, make
sure that "OK" appears in the temperature indicator.
The symbol on the left side indicates the location of the coldest area of
Summary of Contents for DP265X
Page 1: ...REFRIGERATEUR COMBINE DP265X...
Page 26: ...COMBI FRIDGE DP265X...
