Set to max for 2H
Keep thermostat to medium-high
during normal use
TEMPERATURE INDICATE
In order to help you get the correct adjustment of your device, it
is equipped with a temperature gauge placed in the coldest area.
For the proper storage of food in your refrigerator and in
particular in the coldest area, make sure that "OK" appears in the
temperature indicator.
The symbol on the left side indicates the location
of the coldest area of your refrigerator. It defines
the height of this area.
Please Note:
If the appliance is switched off you must wait at
least 5 minutes before restarting the appliance or re-inserting
the plug into the wall outlet. This is to allow the protection device
in the compressor to reset.
If the compressor fails to start correctly remove the plug and wait
for 5 minutes before you try again then the compressor should
restart normally.
The storage temperature may be affected by:
– The room temperature
– How often the door is opened
– How much food is stored
– Position of the appliance
When you set the correct temperature, all these factors
mentioned above shall be taken into account.
For every modification of your thermostat, you are supposed
to wait for the stabilization of the temperature inside the unit
before proceeding, if necessary, to a new setting. Do change the
position of the thermostat gradually and wait at least 12 hours
before re-checking.
NOTE:
after charging the device for fresh food or after repeated
or prolonged door openings, it is normal that the inscription «OK»
does not appear in the temperature indicator.
Wait at least 12 hours before readjusting the thermostat.
Temperature of the
refrigerator
Temperature of the refrigerator
Temperature of the freezer
43
42
GB
GB
