Reversing the door
To dismantle the refrigerator door
a� Use a tool to remove the screws from the upper hinge cover,
remove the upper hinge, and install the communication wire
into the hole on the top of the refrigerator�
b� Screw off the three bolts on the upper hinge, remove the upper
hinge, and pry off the upper hinge cover, door sleeve, magnet�
c� Put the door communication wire into the hole on the door, and
then cover it�
d� Remove the three bolts from the hinge cover on the left-side
top of the refrigerator, remove the hinge cover, take out the wire
harness in the hole, and install the door shaft sleeve�
e� Lift the refrigerator door up by 50mm to remove the refrigerator
door�
f� Remove the front leveling feet, use the tool to remove the 4
screws to fix the hinge, and then remove the hinge�
61
60
GB
GB