Saber Edge LM-21AHD Operator'S Manual Download

Page: 1 / 14

Warning

Read and Follow all safety rules and instructions in this manual before attempting to operate

this machine.

Failure to comply with these instructions may result in personal injury.

Operator’s Manual

21” Aluminum Deck

Walk Behind Lawn Mower

Thank you for purchasing a Saber Edge Lawn Mower It was carefully engineered to provide excellent

performance when properly operated and maintained. It is designed primarily for cutting grass on

well-maintained lawns on residential or commercial properties. It is not designed for cutting brush or for

agricultural uses.
Before operating your new Saber Edge it is strongly recommended all operators carefully read this manual in

its entirety before operating the equipment. This manual explains how to operate and maintain the product

properly and safely to avoid injury and property damage.
You may contact Saber Edge Corporations directly at www.saberturf.com for product and accessory

information, help

�i

nding a dealer, or to register your product.

Whenever you need service, genuine Saber Edge parts, or additional information, contact an Authorized

Service Dealer or Saber Edge’s Customer Service and have the model and serial numbers of your product ready.

Saber Edge Corporation www.saberturf.com

Walk Behind Model : LM-21AHD

Summary of Contents for LM-21AHD















Search results

Summary of Contents for LM-21AHD

Reviews:

Related manuals for LM-21AHD

Brands by name

Popular brands

Saber Edge LM-21AHD, Operator'S Manual

Search results

Summary of Contents for LM-21AHD

Reviews:

Related manuals for LM-21AHD

Brands by name

Popular brands