6
Safety and
Instructional Decals
Important: All damaged or illegible safety and
instruction decals should be replaced.
They are located near areas of potential danger.
Product Overview
1.
Blade control bar
2.
Traction Clutch Bar
3.
Knob (4)
4.
Grass Catcher
5.
Cutting Height Lever
6.
handle
Safety Warning Label
Danger Decal
Setup
Important:
Remove and discard the protective
plastic sheet that covers the engine.
Installing the Handle
Important: When folding or unfolding handle be careful
not to pinch or damage the cables. Damaged cables will
1
2
3
4
5
6
7
1.
Warning-‐ Read owners manual
2.
Thrown object hazard-‐ keep bystanders a safe distance from the
machine
3.
Disconnect the spark-‐plug wire and read the instructions before
servicing or performing maintenance.
4.
Gasoline is highly flammable. Fill oil and gasoline with caution
outdoors. Never near open flame or sparks.
5.
Cutting/dismemberment hazard of hand or foot, mower
bladestay a way from moving parts and keep all guards and
shields in place
.
6.
Wear eye, ear and head protection when operating unit.
7.
Cutting/dismemberment hazard of hand or foot, mower
blade-‐ do not mow up and down slopes, only mow across; stop the
create unsafe operating conditions
If the cable[s] is damaged do not use the machine and
contact an Authorized Service Dealer
•
Remove top handle and spin handle around and
lay on the ground flat with blade control bar
facing upward.
•
Rotate lower handle to the operating position
Align the lower handle hole with lower handle
bracket and insert two 5/16th x 1 inch carriage
bolts on both sides using 5/16th flat washer and
nut and tighten.
•
Securely tighten all four lower handle bolts
•
Install upper handle to lower handle using 5/16th
x 2 inch carriage bolts and handle knobs. Making
sure cable is on top of the handle.
•
Snap on the two cable clamps
to the handle one on the top
handle and other on lower
handle securing the cable to
the handle.
mower engine, pick up debris before operating: look behind and
down when reversing.
