Always keep the threaded holes clean and lubricated with lithium grease code [MHW033].
•
During assembly, be careful to not allow sand into the screws or threads.
•
After every use, disassemble the parts and grease threads with lithium grease code [MHW033].
•
Do not expose to extreme temperatures or direct sunlight over long periods, however do not expose to temperatures exceeding 100° C / 212° F.
•
Use adequate head protection and floatation vest.
•
Be aware about the regulations enforced in your area with regards to sailing, surfing, windsurfing and kitesurfing.
•
1
SABFOIL warrants this product to be free from major defects in material or workmanship to the original purchaser.
The warranty is valid only when this product is used for normal recreational activities and does not cover damage caused by use in shallow water or rocks,
unauthorized repair, changes, modifications and not correct maintenance.
SAB Heli Division s.r.l. decline all liabilities for injuries or damage due to any use of their products.
www.sabfoil.com
sales@sabfoil.com
SAB Heli Division s.r.l. - Via Guido Rossa 7/9, 47030 San Mauro Pascoli (FC), Italy -Tel +39 0541931612 - VAT 03976400402
Always keep the threaded holes clean and lubricated with lithium grease code [MHW033].
•
During assembly, be careful to not allow sand into the screws or threads.
•
After every use, disassemble the parts and grease threads with lithium grease code [MHW033].
•
Do not expose to extreme temperatures or direct sunlight over long periods, however do not expose to temperatures exceeding 100° C / 212° F.
•
Use adequate head protection and floatation vest.
•
Be aware about the regulations enforced in your area with regards to sailing, surfing, windsurfing and kitesurfing.
•
1
SABFOIL warrants this product to be free from major defects in material or workmanship to the original purchaser.
The warranty is valid only when this product is used for normal recreational activities and does not cover damage caused by use in shallow water or rocks,
unauthorized repair, changes, modifications and not correct maintenance.
SAB Heli Division s.r.l. decline all liabilities for injuries or damage due to any use of their products.
www.sabfoil.com
sales@sabfoil.com
SAB Heli Division s.r.l. - Via Guido Rossa 7/9, 47030 San Mauro Pascoli (FC), Italy -Tel +39 0541931612 - VAT 03976400402
Always keep the threaded holes clean and lubricated with lithium grease code [MHW033].
•
During assembly, be careful to not allow sand into the screws or threads.
•
After every use, disassemble the parts and grease threads with lithium grease code [MHW033].
•
Do not expose to extreme temperatures or direct sunlight over long periods, however do not expose to temperatures exceeding 100° C / 212° F.
•
Use adequate head protection and floatation vest.
•
Be aware about the regulations enforced in your area with regards to sailing, surfing, windsurfing and kitesurfing.
•
1
SABFOIL warrants this product to be free from major defects in material or workmanship to the original purchaser.
The warranty is valid only when this product is used for normal recreational activities and does not cover damage caused by use in shallow water or rocks,
unauthorized repair, changes, modifications and not correct maintenance.
SAB Heli Division s.r.l. decline all liabilities for injuries or damage due to any use of their products.
www.sabfoil.com
sales@sabfoil.com
SAB Heli Division s.r.l. - Via Guido Rossa 7/9, 47030 San Mauro Pascoli (FC), Italy -Tel +39 0541931612 - VAT 03976400402
Always keep the threaded holes clean and lubricated with lithium grease code [MHW033].
•
During assembly, be careful to not allow sand into the screws or threads.
•
After every use, disassemble the parts and grease threads with lithium grease code [MHW033].
•
Do not expose to extreme temperatures or direct sunlight over long periods, however do not expose to temperatures exceeding 100° C / 212° F.
•
Use adequate head protection and floatation vest.
•
Be aware about the regulations enforced in your area with regards to sailing, surfing, windsurfing and kitesurfing.
•
1
SABFOIL warrants this product to be free from major defects in material or workmanship to the original purchaser.
The warranty is valid only when this product is used for normal recreational activities and does not cover damage caused by use in shallow water or rocks,
unauthorized repair, changes, modifications and not correct maintenance.
SAB Heli Division s.r.l. decline all liabilities for injuries or damage due to any use of their products.
www.sabfoil.com
sales@sabfoil.com
SAB Heli Division s.r.l. - Via Guido Rossa 7/9, 47030 San Mauro Pascoli (FC), Italy -Tel +39 0541931612 - VAT 03976400402
www.sabfoil.com
sales@sabfoil.com
SAB Heli Division s.r.l. - Via Guido Rossa 7/9, 47030 San Mauro Pascoli (FC), Italy -Tel +39 0541931612 - VAT 03976400402
1
www.sabfoil.com
sales@sabfoil.com
SAB Heli Division s.r.l. - Via Guido Rossa 7/9, 47030 San Mauro Pascoli (FC), Italy -Tel +39 0541931612 - VAT 03976400402
1
www.sabfoil.com
sales@sabfoil.com
SAB Heli Division s.r.l. - Via Guido Rossa 7/9, 47030 San Mauro Pascoli (FC), Italy -Tel +39 0541931612 - VAT 03976400402
1
3
2
3
Right tightening
Insert the four special t-nuts (1) inside the board rails
Place the mast (2) on the board in the correct position
Insert the four scews M8X35 with the four washers
Ø15.7xØ8.5x1.5mm (3) and proceed to screw
2
1
1
Always keep the threaded holes clean and lubricated with lithium grease code [MHW033].
•
During assembly, be careful to not allow sand into the screws or threads.
•
After every use, disassemble the parts and grease threads with lithium grease code [MHW033].
•
Do not expose to extreme temperatures or direct sunlight over long periods, however do not expose to temperatures exceeding 100° C / 212° F.
•
Use adequate head protection and floatation vest.
•
Be aware about the regulations enforced in your area with regards to sailing, surfing, windsurfing and kitesurfing.
•
2
1
1
2
3
REQUIRED HARDWARE [MHW025]:
-Self-tapping screws M5X25mm
-Washers Ø6.4xØ12x1.6mm
Right tightening
Insert the four special nuts (1) in the four holes in the mast plate
Insert the four screws M6X35 with the four washers Ø6.4 x Ø18 x 1.6mm (2)
Proceed to screw
Assembly of mast
Assembly of footstrap
REQUIRED HARDWARE [MH116]:
-Button head screws M8X35mm
-Special t-nuts
-Washers Ø15.7xØ8.5x1.5mm
SAB Heli Division s.r.l. - Via Guido Rossa 7/9, 47030 San Mauro Pascoli (FC), Italy -Tel +39 0541931612 - VAT 03976400402
2
BOARD MANUAL T22
www.sabfoil.com
sales@sabfoil.com
www.moseshydrofoil.com
sales@moseshydrofoil.com
Moses is a company in partnership with
SAB Heli Division s.r.l. - Via Guido Rossa 7/9, 47030 San Mauro Pascoli (FC), Italy -Tel +39 0541931612 - VAT 03976400402
Check the latest version
of this manual
MAST ASSEMBLY
FOOTSTRAP ASSEMBLY
