EN
35
On/Off (Fig. “A”):
• Press the ON/OFF button to acti-
vate the thermostat.
• Press the ON/OFF button to
deactivate the thermostat.
• The word “ON” or “OFF” will
appear in the display.
USING THE CONTROL
Selecting Modes (Fig. “C”):
• Press the “M” button to select the
desired operation mode:
• Use buttons “+” or “-” to select the
operation mode:
−
the cooling mode is set.
−
the heating mode is set.
−
automatic cooling/ heating
mode is set (to be used only with
4 pipe systems).
− the
ventilation mode only is set.
• Press the “M” button to confirm.
Set Temperature (Fig. “B”):
• Press the “+” or “-” buttons the
set temperature will flash.
• Adjust the set temperature using
the “+” or “-” buttons.
Fan speed selection (Fig. “D”):
• Press the
FAN
button
to set:
−
Fan low speed
−
Fan medium speed
−
Fan high speed
−
Sets the speed automatic
variation of the fan
°
Fig. “A” / Abb. “A”
Fig. “B” / Abb. “B”
Fig. “C” / Abb. “C”
Fig. “D” / Abb. “D”
