6
1
2
3
4
W
All
m
ounting
CAUTION: Be careful not to scratch or damage the interior components of the SWASS-
EXT-3 Antenna Kit. Interior components can be disassembled and reassembled using
fingers. Do not use metal pliers, wrenches, screwdrivers or knives to unscrew or tighten
interior antenna components to the metal antenna bracket frame.
Gently pry the wood-grained
exterior case from the rest of the
antenna assembly.
Unscrew the black microphone mount
from the antenna assembly.
Using fingers only, unscrew the white
plastic nut and remove the antenna
component from the metal bracket.
Attach the TNC elbow to your antenna
cable and thread the elbow through
the rectangular metal cutaway in the
wall-mount bracket. Screw the TNC
elbow onto the separated antenna
component so that the cable end will
go through the cutaway. Tighten finger
tight only.
5
Reconnect the antenna component
to the metal bracket with the TNC el
-
bow positioned through the cutaway.
Tighten the white plastic nut finger
tight only.
NOTE:
Make sure
the rectangular
silver shield case
(
shield
-
w2antl
) will
face away from the
bracket when the
component has been
remounted.
