background image

W

GB

Dear Garden Owner,

your SABO lawn-mower is a top performance ma-
chine guaranteed to help you keep your lawn look-
ing good.
Your new SABO lawn-mower is best suited to 
average to large lawn areas that need to be cut 
regularly. Whether your lawn is short, long, or very
long, or has just been laid, this SABO lawn-mower will
be just what you need.
Please read through these operating instructions 
carefully before using your lawn-mower for the first 
time. The greater attention you give to technical 
instructions, the more reliable your SABO lawn-mo-
wer will be.
We would like to point out that any damage caused
to the lawn-mower through operating errors is not
covered by the warranty.

Safety instructions are marked 
at the beginning of the text 
as follows:

W

Special attention should be paid to these sections
for your own safety!

1.

Parts of the lawn-mower 

1

1

Safety switch contact for motor brake

2

Upper handle

3

Wing nut connection

4

Lower handle

5

Tank cap

6

Oil filter with oil dipstick

7

Engine

8

Exhaust

9

Spark plug

10

Cutting height indicator

11

Grip for cutting height adjuster

12

Air filter

13

Grass collector

14

Starter cable grip

15

Operating lever for engine

W

2.

General Safety Guidelines for the hand held 
rotary lawnmower (petrol)

– For your own safety and in order to ensure the 

functioning of the lawnmower, please read these
instructions carefully.

– Please remember, that the operator of the 

machine or the person using the machine is 
not only responsible for endangering other 
people or their property, but is also responsible for
accidents which occur whilst using the machine.

– This instruction manual is part of the delivery

quantity of the lawnmower and must be provided
to the purchaser of the lawnmover in the event 
of resale.

– Never allow children or persons under the age of

16 or orther persons who are not familiar with the
instructions on how to operate the machine, to
use the machine. Please note, that local regula-
tions can determine the minimum age of the
person allowed to use the machine.

– Please explain the possible dangers and how to

prevent accidents to every person who is sup-
posed to work with this machine.

– Please store your lawnmower in safe place.

Lawnmowers which are not being used, should be
stored in a dry, locked room which is inaccessible
to children.

– The lawnmower is only designed for the care of

grassy areas and lawns. If they are being used in
public areas, parks, sports grounds, roads and in
agricultural and forest areas, special care must
be taken.

– The machine must not be used in connection with

any accessories which have not been approved
by SABO, because in doing so, the hand-over per-
mit and any guarantees then become null 
and void.

– The lawnmower may not be used to trim bushes,

hedges and shrubs, it may not be used to cut
climbing plants or plants growing on roofs and 
on balconies, to vacuum or clear pavements.

– You must never mow if there are persons, especi-

ally children or animals, nearby.

Preparatory measures
– Whilst mowing, you must always wear proper

shoes and long trousers. Do not use the lawn-
mower if you are barefoot or wearing sandals.

– Always check the area in which you intend to use

the lawnmower completely for stones, sticks, wires
and other foreign bodies before and whilst you
are mowing it.

W

WARNING
– Petrol is extremely flammable.

– Only store the petrol in the containers 

designed for this purpose.

17

Summary of Contents for TurboStar 43-4 TH Classic






























































Reviews: