Service Transmission - Page 48
SERVICE TRANSMISSION
Transmission Oil (Models 1842HV and
1848HV Only)
NOTE: Your SABRE Yard Tractor is filled with 5W30
at the factory
Use 5W30 or 10W30 when adding transmission fluid.
Check Automatic Transmission Fluid Level
(Models 1842HV and 1848HV Only)
1. Park machine on level surface.
2. Allow oil in transmission to cool before checking.
3. On the rear of the tractor, there is a sight hole (A)
through the left rear side of the fuel tank. The automatic
transmission reservoir can be seen through the sight
hole.
4. Check FULL (B) and ADD (C) marks on the reservoir
bottle which will indicate if fluid needs to be added.
5. Add transmission fluid if necessary. (See Adding
Automatic Transmission Fluid below.)
Adding Automatic Transmission Fluid
(Models 1842HV and 1848HV Only
1. Tip seat forward and slide seat suspension all the way
forward.
2. Remove cap (A) from automatic transmission
reservoir. Cap is located under seat and left of fuel cap.
3. Fill to correct level using 5W30 or 10W30 motor oil.
DO NOT OVERFILL.
M63559
A
M63557a
B
C
B
C
A
