ENG 42
TROUBLESHOOTING
PROBLEM
SITUATION
LIKELY CAUSE
SOLUTIONS
9.
Unusual vibra-
tions while
working
Key in «ON»,
engine running
– the blade is imbalanced
– blade loose
– fixing screws loose
– cutting deck is obstructed
– balance or replace the
damaged blade
– check that the blade is
firmly fitted
– check and tighten all the
fixing screws of engine and
the machine
– remove the grass-catcher,
empty the collector channel
and clean the inside of the
cutting deck
If problems continue after having carried out these operations, contact your
Dealer
.
Do not take on complicated repair work if you don't
have the necessary equipment and the technical knowledge. The gua-
rantee is automatically revoked and the manufacturer declines all
responsibility for any repairs which are badly done.
!
WARNING!
