2
0171-761-EN
Preface
This instruction manual describes the
UNISAB S-Control system in detail, includ-
ing function, use, maintenance, service and
trouble shooting.
Please read this manual carefully to ensure
that you thoroughly understand the
UNISAB S-Control system, and know how
to operate it correctly. Damage which oc-
curs as a result of incorrect operation is not
covered by SABROE’s guarantee.
On top of page 1 of this instruction manual
the version number of your UNISAB is
stated.
At the end of the instruction manual (please
refer to the table of contents), any later ver-
sions are described in the
List of versions
(
0178-178
).
Versions with a higher number than that of
your UNISAB are not relevant.
Warning
If it proves necessary to service the UNISAB S-Control system, the power supply to the compres-
sor motor
must
be switched off at the main switch to prevent the compressor from being started
accidentally.
The UNISAB S-Control box contains live parts which makes it absolutely necessary that you
comply with the safety regulations prescribed on site. Failure to do so may cause damage to
equipment and affect personal safety.
Even though the power supply to UNISAB S-Control is switched off, some of the terminals may
still be live.
Only authorized personnel are permitted to service the UNISAB S-Control.
Technical data
Power supply:
Nominal VAC
115
230
Tolerance
+10/--15%
+10/--15%
Hz
45-65
45-65
Consumption:
Ambient temperature:
Humidity:
25 VA
0 - 55
°
C (operation)
20 - 90% relative humidity (not condensing).
The contents of this instruction manual must not be copied or communicated to a third
party without the prior consent of SABROE Refrigeration.
SABROE REFRIGERATION A/S
P.O. Box 1810, DK--8270 Højbjerg
Chr. X’s Vej 201, Århus, Denmark
Phone:
Telefax: +45 6 27 44 08
+45 6 27 12 66
Telex:
6 87 40
PRODUCT DIVISION
Summary of Contents for UNISAB S-Control
Page 1: ......
