Portable bell
ENG
Transmitter
1. To open the transmitter, slide a screwdriver below the Bell Push slot, apply a slight pressure and take
the base of the button.
2. Mount the transmitter in an upright position on a wall or doorframe by using the screws or double-
sided sitcky pad supplied.
3. Insert battery
4. Close the cover and press to lock into position
Receiver
1. Slide open the battery cover at the back of the unit.
2. Insert 2 X 1,5 V AA batteries, ensuring the battery polarity matches the internal marking and lock
the cover.
3. This unit can be carried around the house or garden or can be placed in any convenient location. The
mount the door chime, hand the unit on a screw using keyhole at the back.
Note
1. Use alkaline batteries, they have a longer life time and do not leak easily.
2. Never use rechargeable batteries
3. Remove the battery if you do not use the chime during a long period of time
4. Do not fix on metal surface
5. Replace battery if chime sounds distorsed
6. The wireless doorbell has an operating distance of 100 M in open area. However, local conditions
and the number of walls may affect its performance. Metal door frames and other factors that inter-
fere with the signal will reduce operating distance.
Wireless
Adjustable volume
LED indicator
Operates over 100
Large selection of sounds
Button suitable for outdoors
Portable receiver
Receiver
Transmitter
Install 2 pcs of 1.5 V AA
alkaline batteries
Open the transmitter
with screewdriver
Bell push
