VAC3- Central Vacuum System
User guide
8.3 CLEANING AND MAINTENANCE OF THE DUST BAG
(Optional - No included - REF. RVAC30055-SC)
8.4 CLEANING AND MAINTENANCE OF THE SELF-CLEANING
FILTER
(Optional - No included - REF. RVAC30056-SC)
1. Remove the central vacuum unit’s dust container.
2. Disconnect the dust bag from its connector
3. Seal the dust bag’s opening with the self-adhesive
tape to prevent dust from spilling out of the bag.
4. Fit a new dust bag by inserting it into the connector.
5. Re-connect the central vacuum’s dust container.
1. Remove the central vacuum unit’s dust
container.
2. Take out the self-cleaning filter
*
.
3. Shake the self-cleaning filter thoroughly to
remove all dust and dirt (washable).
4. Re-fit the self-cleaning filter in its housing taking
care to ensure that it’s reinstalled securely**.
5. Re-fit the central vacuum dust container.
8.5 CLEANING THE OUTSIDE
We recommend to clean periodically the outside of the central vacuum unit using a soft cloth
moistened in water and neutral soap, allowing it to dry completely before starting the system again. Do
not use solvents, alcohol or any chemical product when cleaning the outside.
**Bend the self-cleaning filter to fit it into the track
within the rim of the central vacuum unit.
Central vacuum track
Bend the filter
Fit the filter into the
track
Fit the filter into the track
*Self-cleaning filter tab
27
