Manual
Video 75 Plus Studio
- 10 -
Turn the spindle to the right until you can see it coming
out at the front of the head.
Place the fixation piece and tighten it with the 2 Allen
screws (Allen wrench #2). The spindle is now fastened.
Secure the balance plate by screwing allen screw size 4
into the hole of camera plate’s receptacle at the provided
place.
The conversion is done.
5.2 Conversion of Video 75 Plus Studio to include Multi
Disc
Put the Video 75 Plus Studio upside down, so that you
can
access the bottom of the head.
The Video 75 Plus Studio can be mounted onto flat base
tripods and pedestals with 4 bolt flat base directly. For
Quickfix mount and all Sachtler pedestals the Multi Disc
from the Sachtler accessory range is required.
It is mounted onto the fluid heads 4 bolt flat base.
5.3 Conversion of the Video 75 Plus Studio to include half
ball
Put the Video 75 Plus Studio upside down, so that you
can access the bottom of the head.
Take at hand the ball adapter piece with clamping screw
from the Sachtler accessory range.
Place the adapter piece into the recess at the bottom side
of the head.
Fasten hand-tight the 4 allen screws.
The fluid head is tightened onto the tripod via the clam-
ping screw.
Summary of Contents for Video 75 Plus Studio
Page 1: ...Video 75 Plus Studio Manual Benutzerinformation Fluid Head Fluidkopf...
Page 5: ...III...
Page 6: ...IV...
