Code entering
To enter the code, press keys
and move
the asterisk to the counter to be changed; select
it through the
ENT
button.
The following message will be displayed:
"CODE?? "
Enter the number to be set on the first character by
means of keys
and confirm the selection with
ENT
. The entered number is then saved and the
cursor moves automatically to the following character.
If a wrong code has been entered, the following
message will be displayed for about two se-
conds:
"CODE FAULTY "
After having entered three wrong codes, the
entering procedure is not allowed any longer.
Counter modification
Large coffee counter
"1 LARGE COFFEE "
"TOTAL: XX"
The counter shows the large coffee amount
dispensed from the last reset.
From the
VENDING
menu, move the asterisk to the
LARGE COFFEE
menu by means of keys
;
confirm the selection with button
ENT
.
By means of the same keys
it is possible
to modify the selected value (to reset the counter,
for example). Use the
ENT
button to save a new
value. Press the
ESC
button to stop the new value
entering procedure and, as a result, the former
counter setting shall be considered.
Coffee counter
"1 COFFEE "
"TOTAL: XX"
The counter shows the regular coffee amount
PROGRAMMING THE MACHINE
RECOMMENDATIONS
85
86
"1 SMALL COFFEE "
"TOTAL "
"HOT WATER "
"TOTAL "
"COUNTER "
"LOCKING "
"COUNTER "
"CYCLES "
Code programming
A code protects the access to the machine
counters; enter it for each programming section
and before carrying out any modification. As
soon as the code is entered, modifications can
be carried out without entering it again as long
as the programming function is enabled.
The machine is not supplied with a code. Keep
to the following indications for code
programming:
By means of keys
move the asterisk to
item
“VENDING”
and select it through the
ENT
key. The following message will be displayed:
"CODE "
" ****"
By means of keys enter the number to be set on
the first character and confirm the selection
through the
ENT
key. The entered number is
saved and the cursor moves automatically to the
following character.
After having entered the complete new code, it
is necessary to save it.
The following message will be displayed:
"NEW CODE=XXXX "
"SAVE NO "
By means of keys
the code can be saved
or not saved:
YES
or
NO
.
dispensed from the last reset.
From the
VENDING
menu, move the asterisk to
the
COFFEE
menu by means of keys
;
confirm the selection through
ENT
.
By means of the same keys
, it is possible
to modify the selected value (to reset the counter,
for example). Press
ENT
to save a new value.
On the contrary, by pressing
ESC
the new value
entering is stopped and, as a result, the former
counter setting shall be considered.
Small coffee counter
"1 SMALL COFFEE "
"TOTAL: XX"
The counter shows the small coffee amount
dispensed from the last reset.
From the
VENDING
menu, move the asterisk to
the
SMALL COFFEE
menu by means of
keys
; confirm the selection through
ENT
.
By means of the same keys
, it is possible
to modify the selected value (to reset the counter,
for example). Press
ENT
to save a new value.
On the contrary, by pressing
ESC
the new value
entering is stopped and, as a result, the former
counter setting shall be considered.
Hot water dispensing counter
"HOT WATER "
"TOTAL: XX"
The counter shows the hot water amount (in ml)
dispensed from the last reset.
From the
VENDING
menu, move the asterisk to
the
HOT WATER
menu by means of
keys
; confirm the selection through
ENT
.
By means of the same keys
, it is possible
to modify the selected value (to reset the counter,
for example). Press
ENT
to save a new value.
On the contrary, by pressing
ESC
the new value
entering is stopped and, as a result, the former
counter setting shall be considered.
Counter
"COUNTER "
"LOCKING: XX"
After a certain number of cycles, this function
allows to stop the coffee dispensing (excluding
hot water, steam and cappuccino dispensing
operations). It can also be used, for example, to
program the machine servicing.
If the
0
value is set, the function is disabled.
From the
VENDING
menu, move the asterisk to
the
COUNTER
menu by means of
keys
and confirm the selection through
ENT
.
Press the same keys to modify the selected value
(for example to set a new servicing limit). Through
ENT
a new value can be saved. On the
contrary, by pressing
ESC
the new value entering
is stopped and, as a result, the former counter
setting shall be considered.
When the set limit has been reached, the coffee
dispensing stops and the following two messages
are displayed:
"COFFEE DISPENS. "
"BLOCKED "
"SELECT PRODUCT "
"READY FOR USE "
Reset the counters by pressing the cappuccino
selection key .
Dosage of ground coffee
33
The coffee dosage adjustment lever (18) allows
the selection of the grinding coffee amount from
6 to 9 grams. Place lever (18) on the required
position.
RECOMMENDATIONS
Prolonged idleness
If the machine hasn’t been used for a prolonged
