37
36
This message appears on the display as soon
as there are 30 coffee grounds in the container.
The machine though does not stop. Remove the
grounds container and empty it.
Grind
If the coffee flows too quickly (coarse grind) or
too slowly (fine grind) into the cup, adjust the
coffee grinder:
Recommended grind level: position 5
Grind too coarse = adjust to a lower value (for
instance from 5 to 3)
Grind too fine = adjust to a higher value (for
instance from 5 to 7).
Adjust the grind level only when the coffee
grinder is running.
Avoid extreme adjustment (for instance, on
position 1) whenever possible. It is preferable to
try another coffee blend, because not all coffee
blends are suitable.
Coffee
Make sure coffee is fresh. An espresso roast is
preferable.
In order to obtain a strong and aromatic espresso
coffee, use special blends suitable for espresso
coffee machines and special cups with thick sides.
Keep coffee in a cool place, in an hermetically
sealed container.
Dosage of ground coffee
28
The coffe dosage adjustment lever (18) allows
the selection of the coffee quantity, from 6 to 9
grams.
RECOMMENDATIONS
BREWING
42
41
with cold water. Each cycle is followed by
a short pause of about 40 seconds.
Never stop the rinsing cycle.
Important:
before starting the rinsing
cycle, always fill completely the water tank
and put a capacious container (min. 1 litre)
under the coffee dispensing unit, which is
height-adjustable and can be removed for
cleaning.
The rinsing cycle needs about 1 litre of
water (including final rinsing). From time to
time, empty the water tank.
By using the keys
move the asterisk to
the menu item RINSING CYCLE. To enable
this menu item use the ENT key.
The following message appears on the
display:
"RINSING CYCLE "
This function starts the rinsing cycle with
water of those parts concerned with the
coffee dispensing. When the rinsing cycle
ends, the following message appears on
the display:
"SELECT PRODUCT "
"READY FOR USE "
Recommendations
Test
If the machine has not been used for a pro-
longed period, it is advisable for hygienic
reasons to run a rinse cycle through the ma-
chine.
Place a cup under the dispensing tube (7) and
operate the steam/hot water (9) knob. Fill a cup
with water.
Preheating cups
Cups may be preheated by placing them on the
heating plate.
Temperature led
When connecting the machine, the display
shows
"WARNING UP...... "
As soon as the operating temperature has been
reached, the display shows
"SELECT PRODUCT "
"READY FOR USE "
Empty coffee bean container
warning light
"COF. BEANS EMPTY "
"READY FOR USE "
When this led is on, the coffee grinder stops. Fill
the container with coffee beans and restart the
cycle.
Empty water tank warning light
"FILL WATERTANK "
An empty water tank causes the cycle to stop
automatically. Fill the tank with water and restart
the cycle.
Grounds container warning light
"DREGDRAWER FULL "
"READY FOR USE "
Place the adjustment lever (18) on the required
position.
Water quality
In addition to blend, grind and water tempera-
ture, the water quality is of the utmost impor-
tance for the brewing of a good coffee. Thus,
the use of a decalcifier to remove limescale and
eliminate any unpleasant taste and organic
impurities from water, is strongly recommended.
Furthermore a water decalcifier partially elimi-
nates limescale from water, thus protecting the
machine heating system from chemical buildup
and prolonging its working life.
The water tank must be emptied daily and filled
with fresh water.
Operation time
The machine may be kept on all day long.
However, it is advisable to activate the energy
saving mode after the last use. Press the Energy
saving switch. If the timer has been programmed,
the machine switches on automatically. See
page 40.
Should the machine not be used for a pro-
longed period (e.g. during the night) it is
advisable to switch the main switch (4) off.
Switching off the machine
Switch the machine off only after the coffee
cycle has been concluded.
Brewing
Cup level filling
This machine allows the precise dosage of the
Man. Titan 0313.959 ING (UL)
12-12-2000, 16:09
6
