English
9
46
9.2.3
Description of messages in the programming menu
DISPLAY
Description
1.
The SYSTEM MANAGEMENT items are:
SYSTEM MANAGEMENT
…
1.1.
Enables an identification code to be assigned to the vending machine.
VM Code
531000
1.2.
Enables setting of the maximum amount of beverage or coffee. Once the maximum amount is reached, the
vending machine stops dispensing the relevant beverages. The first digit on the left (“00000”) refers to the quantity
of product dispensed since the last “RESET” (partial counters).
Stops
…
The right hand digit, preceded by “LIM”, shows the maximum dispensable quantity (value
may be modified).
1.2.1.
Enables setting of the maximum number of coffee cups to be dispensed before the stop.
Stop coffee K
1.2.2.
Enables setting of the maximum number of coffee cups to be dispensed before the stop.
Stop coffee C
1.2.3.
Enables setting of the maximum number of beverages to be dispensed before the stop.
Stop beverages
1.2.4.
Enables resetting of all partial counters relative to product quantity stop functions.
Reset
1.3.
(Only if complete Menus are enabled)
Step down counters
…
Allows the use of the water filter to be checked.
1.3.1.
Date of the last filter reset.
Last Filter Change
31/01/2008
1.3.2.
Number of litres of water that can still be dispensed before the filter needs to be
regenerated. When this value is less than 1, a Warning (W83) is recorded in the Error
LOG.
Remaining qty
95
1.3.3.
Number of litres of water that can still be dispensed from the filter.
Filter limit
100
1.3.4.
Select YES to indicate a new filter has been installed This operation returns “Remaining Qty”
to the same value as “Filter Limit” and the date in the “Last Filter Change” is changed to
today’s date.
Filter reset
1.3.5.
Enables management of the "Remaining Qty" countdown.
Filter enabled
yes
Important
From the maintenance menu (button P2 on the CPU), you can access "Water Filter", "Last
Filter Change", "Remaining Qty" and "Filter Reset".
1.4.
It enables setting the coffee boiler management parameters.
Boiler 1 temp.
00
1.4.1.
It allows you to set the temperature that the vending machine keeps for a few minutes after
a beverage has been brewed. The set value is expressed in centigrade.
Min. Temperature
90
1.4.2.
It allows you to assign the temperature to which the vending machine is brought after a
certain time from the last dispensing, so that the natural lowering of the temperature of the
hydraulic circuits can be compensated. The set value is expressed in centigrade.
Max. Temperature
100
1.5.
Allows setting the working temperature for the instant products boiler
Boiler 2 temp.
00
Summary of Contents for Atlante 500
