English
9
54
DISPLAY
Description
2.3.3.
Enables setting of the value of banknotes transferred to the vending machine from the
parallel reader.
Banknote Value
…
2.3.3.1.
Banknote
1/4
0.00
2.4.
Enables access to particular functions of the MDB protocol.
MDB settings
…
2.4.1.
It allows disabling or enabling the possibility of performing any Saeco Card recharge
operation By setting RECHARGE = NO the vending machine will only deduct the cost
from MDB cards.
Recharge Enabled
no
2.4.2.
Enables setting of the maximum credit level, beyond which all recharge operations (if
enabled) are ineffective. By setting MAX RECHARGE = 20.00, the credit on the vending
machine will be transferred to the card if the sum does not exceed 20.00.
Max Card Recharge
10.00
2.4.3.
It enables to set the maximum credit level, beyond which the card is rejected by the system.
By setting MAX CARD VALUE = 25.00, the vending machine will reject all cards with a
credit which exceeds this amount. If this card is detected, the display will not show the
credit but a “ ——” message will be displayed and no sale will be carried out.
Max Card Value
10.00
2.4.4.
Coins Enabling
…
2.4.4.1.
Coin
1/16
no
2.4.5.
It enables / disables the use of Alternative Payout for the level 3 MDB change-giving coiner.
By setting "Yes" the change-giver is called on to dispense change.
Alt. payout
no
Change is limited to 255 times the scaling factor (typically € 12.75 for the Euro area - with
scaling factor of 5).
By setting “No” change is given by exploiting the machine’s algorithm. Max. change is 60000
units (typically € 600 for the Euro area).
2.4.6.
Enables setting of the maximum amount of change which can be dispensed by the
change-giving coiner. Default = 10.00.
Max change
0.00
2.4.7.
With MDB coin return, the "no change available" status can be selected through the
"CHANGE TABLE".
Exact change policy
Note
0
Even if the no change available message is displayed, the vending machine continues to give
change as long as coins are present in the channels. The minimum level (the same for all
channels) can be set on a special menu item.
2.4.8.
Enables setting of the minimum number of coins in the channels. Default = 4.
Min Tube Level
0
2.4.9.
Allows the coin return tubes to be filled by hand. Press Esc to exit the channel loading
mode.
Manual Tube Filling
…
2.4.10.
Allows the change-giving coiner channels to be emptied by pressing the beverage selection
keys.
Manual Tube Empty
…
2.4.11.
By setting “N”, the credit inserted can be returned even if no sale has been made. This
function may be useful, for example, for changing banknotes into coins. By setting “Y”, the
credit inserted can be returned as change only after the sale has been completed. Default =
YES.
Commit to vend
no
2.4.12.
Bill Enabling
…
Summary of Contents for Atlante 500
