English
12
86
Cause
Error
Code
Machine without snack
slaves
Machine With
Snack Slaves
Notes / Recommended Intervention
Slow instant
product boiler
warming up
37
Models with 2 boilers
==>beverages with instant
products not available
Beverages with
instant products
not available
---
Instant Models ==> Vending
machine out of service
BDV warning
41
Warning only
Warning only
Warning report only in the LOG.
Spiral motor
error - the
machine has not
detected the
spiral position
correctly.
51
---
Selection disabled Selection disabled.
Use the “automatic alignment” to enable
again.
Spiral motor
excessive input
error
52
---
Selection disabled Selection disabled.
Use the “automatic alignment” to enable
again.
Power board
power supply
voltage below
the allowed limit
54
---
Slave disabled
Check the +24VDC power supply unit.
Spiral motor not
detected at
start-up
55
---
Slave disabled
Check the spiral tray connections
Photoelectric
cells - product
fall detected only
after the
correction
(spiral extra
movement)
58
---
Warning only
Warning report only in the LOG.
Check that the products have been
correctly supplied in the spirals.
Photoelectric
cells - product
fall not detected.
59
---
Warning only
Warning in the error LOG - Credit
returned (if the function is enabled)
Photoelectric cells -
the maximum
number of
consecutive E59
errors in a selection
has been reached.
60
---
Selection disabled Selection disabled.
Use the “automatic alignment” to enable
again.
Error in the
communication
with the power
board
61
---
Slave disabled
Check the connections between power
board and CPU board
Summary of Contents for Atlante 500
