English
13
88
13
STORAGE DISPOSAL
13.1
Change of location
Should the vending machine be positioned in another site
it is necessary to carry out the following operations:
• unplug the vending machine;
• empty the instant product, coffee bean and sugar
containers;
• empty the instant product boiler and the AIR BREAK.
Remove the pipe cap and channel the water into a
container. After draining the pipe completely, fit the cap
back into its original position;
• empty the coffee grounds bag (see section "Replacing the
Coffee Ground Bag");
• empty the fluid discharge tank and wash it (see section
"Emptying the Liquid Product Tank").
• carry out the general cleaning of the vending machine as
indicated in chapter “Cleaning and Maintenance";
• put the components back in place and close the doors;
• lift and place the vending machine in the assigned location
following the instructions given in section “Vending
Machine Unpacking and Positioning”.
13.2
Inactivity and storage periods
If the vending machine needs to be stored or remains
inactive for a long period, carry out the same operations
as described in section “Change Location", therefore:
• wrap the vending machine in a tarpaulin to protect it from
dust and damp;
• check that the vending machine is in a suitable place (the
temperature should not be less than 1°C) taking care not
to place any boxes or appliances over it.
Summary of Contents for Atlante 500
