• 18 •
selection knob (17) to the " " position and close the knob
(3) by turning it clockwise.
•
(Fig.3) -
Fill the tank with fresh drinking water.
•
(Fig.13-14) -
Insert the fi lter holder into the brew unit (8)
from the bottom and turn it from left to right until it locks
into place.
•
(Fig.15) -
Place a suitable container under the fi lter
holder.
•
(Fig.16) -
Turn the selection knob (17) to the "
" position
and dispense all the water in the tank.
(Fig.17) -
Once the tank is empty, stop dispensing and
switch the selection knob (17) to the " " position.
• Fill the tank again and wait until the "machine ready" light
(20) turns on.
•
(Fig.19) -
Remove the fi lter holder from the unit by turning
it from right to left and rinse it with fresh drinking water.
The machine is now ready; please see related sections for
operating details on how to brew coff ee and dispense steam.
5 COFFEE
BREWING
Warning! During the coff ee brewing it is
forbidden to remove the pressurized fi lter
holder by manually turning it clockwise. Danger of
burns.
• During this operation, the "machine ready" light (20) may
fl ash; this is to be considered as a standard and not a faulty
operating mode.
• Before using the machine, make sure that the hot water/
steam knob (3) is closed and that there is enough water in
the tank.
•
(Fig.3) -
Press the ON/OFF button (11) and switch it to the
"I" position.
• Wait until the "machine ready" light (20) turns on. The
machine is now ready for coff ee brewing.
Accessories for coff ee brewing are placed in
a specially designed seat to make operations
easy and immediate.
If the ground coff ee measuring scoop and/or the fi lters
are required, lift the cover (2) and take what you need
(Fig.35 e Fig.36).
5.1 Using Ground Coff ee
•
(Fig.7) -
Insert the fi lter (14) in the pressurized fi lter holder
(12); the fi lter is already inserted when using the machine
for the fi rst time.
•
(Fig.13) -
Insert the fi lter holder into the brew unit (8) from
the bottom.
•
(Fig.14) -
Turn the fi lter holder from left to right until it
locks into place. Release the pressurized fi lter holder grip.
The handle will slightly turn to the left. This movement
guarantees proper fi lter holder performance.
•
(Fig.16) -
Preheat the pressurized fi lter holder by switching
the selection knob (17) to the "
" position until some
water spills out of it. This is to be done only for the fi rst
coff ee brewing.
•
(Fig.17) -
When 150 cc of water have fl owed out, set the
selection knob (17) to the " " position to stop brewing.
•
(Fig.19) -
Remove the fi lter holder from the machine by
turning it from right to left and pour out any water left. As
the machine is fi tted with the special fi lter (14), there is no
need to change the fi lter to make one or two coff ees.
•
(Fig.35) -
Remove the measuring scoop from the
machine.
•
(Fig.8) -
Add 1-1.5 measuring scoop(s) for single coff ee
and 2 measuring scoops for double coff ee. Remove any
coff ee residues from the rim of the fi lter holder.
•
(Fig.13) -
Insert the fi lter holder (12) into the brew unit (8)
from the bottom.
•
(Fig.14) -
Turn the fi lter holder from left to right until it
locks into place.
•
(Fig.15) -
Take
1 or 2 preheated cups
and place them
under the pressurized fi lter holder. Make sure that they are
correctly placed under the coff ee brewing nozzles.
•
(Fig.14) -
Switch the selection knob (17) to the "
"
position.
• When the desired quantity of coff ee has been obtained,
turn the selection knob (17) to the " " position to stop
coff ee brewing. Wait a few seconds after brewing has
stopped, then remove the cups of coff ee
(Fig.18)
.
•
(Fig.19) -
Remove the pressurized fi lter holder and empty
out the remaining coff ee residues.
Note: If a small quantity of water remains
in the fi lter holder, this has to be considered
as absolutely normal and is due to the fi lter holder
features.
Important Note: The fi lter (14) should be kept
clean to guarantee perfect results. Clean daily
after use.
