Saeco HD8603 Bravista Latte +, User Manual

 1 

 Insert an espresso capsule. 

 2 

 Fill the milk carafe with milk to a level between the MIN and MAX 

indications. Put the lid on the milk carafe and place the carafe in the 

machine.

 3 

 Press and hold the white café latte button for 3 seconds until it 

starts to flash at brief intervals. Then release the button.

,

The machine dispenses milk froth.

 4 

 Press the white café latte button again when the cup contains the 

desired amount of milk. The machine has saved the desired amount 

of milk and starts to brew the espresso.

 5 

 Press the white café latte again when the cup contains the desired 

amount of espresso coffee. The machine has saved the desired 

amount of espresso.

Note: The café latte button has been reprogrammed. The machine will dispense 

the reprogrammed amount of milk and coffee every time you press the café 

latte button. 

The minimum quantity of espresso that can be set is approx. 30ml.

The maximum quantity of espresso that can be set is approx. 300ml. 

The minimum quantity of milk that can be set is approx. 50ml.

The maximum quantity of milk that can be set is approx. 300ml.

The preset quantities for café latte are approx. 90ml milk and approx. 40ml 

espresso.

To reset beverages to their factory settings, see section ‘Restoring quantities 

to factory settings’. 

Frothed milk 

Note: To prepare frothed milk, it is not necessary to insert a coffee capsule. 

 1 

 Fill the milk carafe with milk to a level between the MIN and MAX 

indications. Put the lid on the milk carafe and place the carafe in the 

machine.

 2 

 Adjust the position of the drip tray and/or the coffee dispensing 

spout.

 3 

 Place a glass under the milk dispensing spout.

Note: Do not insert a coffee capsule into the capsule compartment.

 4 

 Press the frothed milk button.

,

 The frothed milk button flashes white to indicate the machine is  

warming up. 

 5 

 After the machine has warmed up, the machine dispenses the frothed 

milk directly into the glass. The machine stops dispensing the frothed 

milk once it has dispensed the preset volume. You can interrupt the 

dispensing process by pressing the white frothed milk button again.

When the machine stops dispensing the frothed milk, the orange rinse 

milk circuit button lights up to indicate the milk circuit must be rinsed. 

See section ‘Rinsing the milk circuit’. 

ENGLISH

16