21
ENGLISH
21
2
Remove the “” water fi lter from its packaging, immerse it ver-
tically (with the opening positioned upwards) in cold water and gently
press the sides so as to let the air bubbles out.
3
Set the “” water fi lter according to the measurements per-
formed (see previous chapter) and indicated on the base of the fi lter:
A = soft water – equals 1 or 2 on the test strip
B = hard water (standard) – equals 3 on the test strip
C = very hard water – equals 4 on the test strip
4
Put the “” water fi lter into the empty water tank. Press it
down until it cannot move any further.
5
Fill the water tank with fresh water and put it into the machine.
6
Dispense all the water in the tank by using the hot water function (see
the “Dispensing Hot Water” section).
7
Fill the water tank again.
Gr
een
8
Press the “
”
MENU
button. The machine shows this icon.
Y
ello
w
9
Press the “
” button to access the programming menu. Press the “
”
button to scroll the functions until this icon appears.
