background image

11

ENGLISH

11

8

 Slowly pour the coff ee beans into the coff ee bean hopper.

 

Note: 

Do not pour too many coff ee beans into the coff ee bean hopper as this will 
reduce the grinding performance of the machine.

 Caution: 

Only coff ee beans must be put into the coff ee bean hopper. If ground
coff ee, instant coff ee, caramelized coff ee, raw coff ee beans or any 
other substance is put in the coff ee bean hopper, it may damage the 
machine.

9

 Put the lid back on the coff ee bean hopper.

10

 Insert the plug into the socket located on the back of the machine.

11

 Insert the plug at the other end of the power cord into a wall socket 

with suitable power voltage.

1

2

5

 Rinse the water tank with fresh water.

6

 Fill the water tank with fresh water up to the MAX level and reinsert it 

into the machine. Make sure it is fully inserted.

 Caution: 

Never fi ll the water tank with warm, hot, sparkling water or any other 
liquid, as this may cause damage to the water tank and the machine.

7

 Lift the coff ee bean hopper lid.

Summary of Contents for Minuto HD8762













































































Reviews: