6
Rinse the jug with fresh water and fill it with half a liter of fresh water for
the rinsing cycle. Empty the container and place it back under the
automatic milk frother.
7
Insert the suction tube into the jug.
8
Press the MILK FROTH button.
9
You can press OK to stop or let the machine dispense until it stops
automatically.
10
Disassemble the milk frother (see 'Disassembling the automatic milk
frother ') and rinse all parts in lukewarm water or in the dishwasher.
Disassembling the automatic milk frother
1
Remove the automatic milk frother from the hot water/steam dispensing
spout. Remove the rubber grip from the hot water/steam dispensing
spout.
Warning: The steam wand can be hot after use.
2
Remove the suction tube.
1
2
1
3
To disassemble the milk frother, press on the sides and pull the lower
part off the upper part.
4
Remove the rubber lid.
5
After cleaning, reassemble the milk frother by following the steps above
in reverse order.
Descaling procedure
When the display asks 'START DESCALING?', you need to descale the
machine. If you do not descale the machine when this message appears on
20
English
Summary of Contents for PICOBARISTO HD8924
Page 2: ......
Page 3: ......
Page 29: ...START DESCALING 23 MIN...
Page 30: ...4219 460 3607 1 9 2016 www saeco com care 75 recycled paper 75 papier recycl...
