2
Pour
one
measuring scoop of pre-ground coffee into the pre-ground
coffee compartment and close the lid.
Caution: Do not put any other substance than pre-ground coffee in the
pre-ground coffee compartment, as this may damage the machine.
3
Place a cup under the coffee dispensing spout.
4
Press the AROMA STRENGTH button and select the pre-ground coffee
brewing function.
5
Press the OK button to confirm.
The machine automatically starts brewing the selected beverage.
Note: With pre-ground coffee you can only brew one coffee at a time.
Special drinks and hot water
How to select special drinks
1
Press the MENU/SPECIAL DRINKS button and select DRINKS.
2
Press the OK button to confirm.
3
Scroll through the menu and select the desired beverage.
Dispensing hot water
Caution: Steam and hot water may spray out of the hot water dispensing
spout when brewing starts. Wait until brewing has ended before you
remove the hot water dispensing spout.
1
Insert the hot water dispensing spout.
2
Press the MENU/SPECIAL DRINKS button. Select DRINKS, confirm and
scroll to select HOT WATER.
Caution: Only select HOT WATER in the menu when the hot water
dispensing spout is installed.
3
Press the OK button to confirm. The display reminds you to install the hot
water dispensing spout; press the OK button to confirm. The machine
starts dispensing hot water.
4
To stop dispensing hot water, press the OK button.
Brewing milk-based coffee beverages and milk froth
Note: For more information on how to use the milk carafe, read the separate
quick start guide or scan the QR code (see 'Introduction ') to access the
dedicated website for instruction videos.
Caution: Make sure that the milk carafe is installed and the milk
froth dispensing spout is open before you select a milk-based
coffee beverage or milk froth. If the milk carafe is not installed
correctly, steam and hot milk may spray out of the milk froth
dispensing spout.
11
English
