-
The hook is not positioned correctly if it is still in bottommost position.
3
Slide the brew group back into the machine along the guiding rails on the
sides until it locks into position with a click.
Caution: Do not press the PUSH button.
4
Close the service door.
Lubrication
For optimal performance of the machine, you have to lubricate the brew
group. See table below for the lubrication frequency. For support visit our
website:
www.saeco.com/care
.
Usage frequency
Nr of beverages brewed daily
Lubrication frequency
Low
1-5
Every 4 months
Normal
6-10
Every 2 months
Heavy
>10
Every month
1
Switch off the appliance and unplug it.
2
Remove the brew group and rinse it under a lukewarm tap (see 'Cleaning
the brew group under the tap').
3
Apply a thin layer of grease around the shaft in the bottom of the brew
group.
4
Apply a thin layer of grease to the rails on both sides (see figure).
5
Reinsert the brew group (see 'Reinserting the brew group').
You can use the grease tube multiple times.
Cleaning the milk carafe
Quick Clean function
After preparing a milk-based beverage, the carafe cleaning icon appears on
the display.
1
Press the MENU button and select QUICK CLEAN, press the OK button to
confirm.
2
Make sure that the milk carafe is installed and the milk froth dispensing
spout is open.
18
English
