• 18 •
• 18 •
PROGRAMMING
The user can change some of the ma-
chine operating parameters to suit his/
her needs.
Enter the “menu”
The programming menu can only be ac-
cessed when the machine is in “stand-by”
mode.
To change the machine status to stand-by
mode, press the ON/OFF button.
Black
Orange
Orange
Orange
Black
Exit programming mode
To exit the programming mode, press the
ON/OFF button until the stand-by page is
displayed.
Note: The machine will exit
the programming mode if
the user does not do anything for
30 seconds. The settings that were
changed but not confi rmed will not
be stored.
- The
“
” and “
“ buttons allow
you to change the value of the function,
among those appearing on the page.
- The
“
“ button allows you to scroll
the functions and to store the changes
that were made.
- The “ON/OFF” button allows you to exit
the change or programming mode.
Programming commands
Changes can be made on each page:
When the machine is in stand-by mode,
press the “
“button to access pro-
gramming.
The fi rst page that is displayed is shown
here.
Note: Changes can be stored
only after the displayed value
is changed; when the displayed value
is changed the “OK” message appears.
Summary of Contents for RI9837/43
Page 47: ...46...
Page 48: ...47 Portugu s...
