Functioning and execution
CHECKLIST BEFORE STARTING
Each operator must read and understand the instructions and must take the safety precautions as described in
this part in order to operate the chipper in a safe and efficient manner. The operator has a checklist for use. It is
important to use it for safety reasons but also to maintain the machine in a good condition.
Before starting the machine, please check the following items:
1) Has the machine been lubricated sufficiently in accordance with the schedule in the user manual?
2) Check the different engine levels, and in particular:
Engine oil
Radiator fluid
Fuel
3) Check the oil level of the hydraulic circuit
4) Check if the air filter is clean
5) Check of the radiator of the engine is clean and free
6) Check of the covers have been closed well
7) The wood shredder may only be used outdoors, not inside rooms, due to the danger of poisoning from the
drive motor and the wood dust from the wood shredder.
8) After setting and blocking the chimney cap and eject, only the operator is authorized to change their positions.
Attachment to a vehic le
When attaching the wood shredder to a vehicle, you must proceed as follows. Set the
support wheel at the height of the drawbar so that the trailer tow bar is over the one
on the vehicle. Now turn in the support wheel and the opened ball-head coupling must
click into the ball on the tow bar.
Please check that it is clicked in!
Then connect the catch line to the vehicle and plug in the plug for the lighting. Fully
retract the support wheel, push the back safety support up, lock and check the lighting.
The support wheel may only be unscrewed up to the marking. In the coupled status,
the display must be within the green range.
(
see page 17
).
Summary of Contents for GS/TIGER 25D
