3
WARNING
PROHIBITIED
· Please watch old person, children, or disabled person near the place that the product is installed.
If so, do not let them alone.
· Do not drop or damage the angle handpiece. In case of malfunction, dropping or falling in water,
do not use it and contact the manufacturer.
·
The equipment is automatically stopped when the machine load is higher than Torque value.
·
Do not damage or drop the LCD part of the control box.
·
Portable and mobile Radio Frequency communications equipment can affect the product.
Do not use Radio Frequency equipment outskirts for the product.
· The system may present a possibility of malfunction when used in the presence of an electromagnetic
interference wave. Do not install the system in the vicinity of the device which emits magnetic waves.
Turn off the power switch of the Control box when an ultrasonic oscillation device or an electrode
knife is located in the vicinity is used.
·
For safety, install the control box in a place where the power cord can be easily removed.
(It is possible to disconnect the control box from the power source by removing the power cord.)
·
Do not use a damaged or broken power cord, plug, or outlet. It may cause fire and/or electric shock.
· When unplugging the power cord, do not touch cord with wet hand.
·
Do not damage the power cord (do not bend too hard, or put heavy objects on it). That may cause
electric shock and/or fire.
· Unauthorized modification and dismantling is prohibited.
· Do not use a solvent such as thinner or benzene for cleaning.
※ Please use an absorbent or alcohol to wipe the controller box. Do not wipe with wet cloth.
※ Be careful not to drop liquid on control box.
·
Do not place the product near any heated equipment and do not put candles or cigarettes on it.
· Use only a grounded outlet. Please contact electrical technician or manufacturer regarding the
ground connection.
·
Be sure to use designated bur by ISO 1797.
· Follow the user manual by manufacturer of bur to use bur.
·
Keep the recommended speed limit by manufacturer of bur to use bur. If exceed the speed limit,
it might cause an accident.
· The product must be used by specialist or dentist. If not, patient might get hurt from improper use.
· If patient is taking antibiotics, patient needs to consult with doctor before operation.
· Keep product away from spray containing flammable material.
· Manufacturer does not have any responsibility for defects or loss to property in the following cases:
1. User did not follow the user manual when using the product.
2. Used the product in a place of unregulated wire condition.
3. Unauthorized person repaired the product.
4. Did not follow the user manual for this product.
· Do not use on the following patients.
1. Those with medical complications or allergies.
2. Those who have pre-existing conditions. (E.g. Cardiac, Pulmonary, Renal disturbance or
High blood pressure)
3. Those who are pregnant or lactating.
4. Patients with cardiac pacemakers and infants.
