13
EQUIPMENT OPERATION
Control panel and operations
4.
- Degassing status
- Illuminated, the degassing function is selected.
- Blinking, the degassing is in progress.
5.
- Normal cleaning status
- Illuminated, normal cleaning is in progress.
6.
Heater status
Press the TC button, it flashes
indicating that the heater is on. Press the TC button again, it
turns off
, indicating that the heater is off.
7.
Time Display LED digital display operation
It counts down, after the work is started.
8. SET button (configuration) – Clock quick setup button.
Press the SET button, the LED displays
. Press the button again to set the clock. Each
time it is pressed, the button adds 5 minutes.
9. Button - Clock decrease button
Each time pressed, reduces the clock in 1 minute.
10. CT Button – Heater button
Press the TC button, when flashing
, i, indicates
that the heater is on. To cancel the heat, press TC again,
it turns off indicating that the heater
is off.
When the water temperature reaches 60°C, the system turns off automatically.