17
EQUIPMENT OPERATION
Operating guidelines
1
Remove the lid, place the items in the basket, and then
put them in the cleaning tank. Add water until a level
between MIN and MAX and above the objects.
If the device is switched on without water, the
ultrasonic energy will not be absorbed. After
more than 30 seconds, this procedure can damage
the device or drastically reduce its lifetime.
Connect the power cord into a power outlet.
The LED display shows
. This configuration is
the most common for the clock and operating status.
If the clock needs to be adjusted, press the SET buttons
and (as required).
The clock can be set between 1 and 30 minutes.
The periods of common cleaning are 5, 10 and 15 minutes.
2
The extension of the cleaning period can result in:
a. Loosening the screws (if used).
b. Increased preexisting cracks.
c. Peeling on the lining of the object.