18
EQUIPMENT OPERATION
Operating guidelines
3
Press the On/Off button once to start the cleaning.
4
During cleaning, a humming can be heard coming from
the cleaning tank, indicating that cleaning is in progress.
Closing the lid will reduce the noise level.
5
The LED display will count down, showing the remaining
cleaning time. When the display reads 0:00, the cleanup
is complete. To interrupt the cleaning at any time, press
the On/Off button.
The unit is designed with overheating protection, to avoid extended and continuous operation for
long time. When the red light is on, the device cannot be activated, even if it is forced to do so.
The unit remain idle for about 20 minutes and can be restarted after the green light illuminates.
Select one of four cleaning methods previously
recommended.
a. When the heater is needed, press the TC button, it
flashes
, indicating that the heater is activated.
When the water temperature reaches 60ºC, the heater
will automatically shut down.
To ensure safety, the unit is designed with double
protection.
The heater will automatically shut down if running for
45 minutes.
b. The degassing function can be used. Press the SET button to set the clock. Press the functions
button, it lights up
. Press the On/Off button to start the degassing. The device switches to the
normal cleaning mode after 90 seconds.
c. When the "smoke" of the waste is no longer visible, the cleanup is complete. If an additional
cleaning is required, press the SET button to reset the clock and repeat the above steps.
When cleaning is complete, disconnect the power cord,
remove the lid and the objects. Pour water through the
retreat. Clean and dry the tank.