24
Problem
Probable Cause
Solution
- Completely dead.
- Plug disconnected from ne-
twork.
- Equipment fuse burned out.
- Lack of power in the network.
– Connect the plug.
- Disconnect the power supply
of the equipment and request
the presence of a Licensed
Technician.
-Wait the network normali-
zation.
- Little or no cavitation.
- Equipment connected on the
inappropriate voltage.
- Ultra generator burn.
- Incorrect voltage installation
or operating without water in
stainless steel bowl.
- Switch on the washer at the
correct mains voltage.
- If the equipment is 110V and
was connected to the 220V
network, it has burned, contact
Accredited Assistance.
- Contact the Authorized Su-
pport.
- Water heating system does
not work.
- Burned resistance.
- Contact the Authorized Su-
pport.
Upon coming across any problem in operation, follow the instructions below to check and
repair the problem, and/or get in touch with your representative.
UNFORESEEN EVENTS – SOLUTION OF PROBLEMS
FINAL CONSIDERATIONS
Among the care you have to take with your equipment, the most important is regarding of the spare
parts replacement.
To ensure the lifetime of your device, only replace original spare parts. They have the assurance of the
standards and technical specifications required by the Saevo representative.
We call your attention to our authorized resellers’ chain. Only this chain will keep your equipment
constantly new, because it has trained technical assistant and specific tools for the correct maintenance
of your device.
Whenever you need, demand the presence of a Saevo’ technician from the nearest resale, or ask through
the Attendance Service Saevo: + 55 (16) 3512-1212.
EQUIPMENT’S WARRANTY
This equipment is covered by the warranty terms and norms contained in the Warranty Certificate
that accompany the product.